31.07.2020
There may be traces of corrosion on the body of used cars. Before applying the PPF, the rust must be removed using solvents and abrasives, after which the problem area should be primed. If this is not done, the film's adhesion to the contact surface will not be good enough, and the protective material will quickly peel off.
If there are dents on the body of a used car, it is recommended to remove them by straightening or using special pulling suckers before gluing the clear bra. If the metal is not straightened before applying the protective material, air bubbles may form between the contact surface and the film in problem areas.
Before applying the paint protection film to the windshield, it is recommended to eliminate cracks and chips on its surface using a polymer. The standard procedure for preparing the car body and Windows for gluing the protective material is to thoroughly wash the contact surfaces. Complex contamination in the form of tar stains and dried wood resin is recommended to remove using a special plastic or silicone scraper.
Booking a car with an clear bra involves preliminary application of soap solution to the body. Before spraying, it is recommended to degrease the contact surfaces with an alcohol-based solvent. This will help to ensure a reliable grip between the film and the body, as well as to minimize the formation of air bubbles during the gluing process.