23.06.2020
The main stages of the procedure
Before pasting, the protective material is cut out according to the patterns corresponding to the size and shape of the desired element.
Then the interior elements are cleaned of dust and other contaminants, and then degreased. Then, using a spray gun, a soap solution is sprayed on the parts, which will ensure reliable adhesion of the film. Its use will facilitate the further process of leveling the film and ensure its reliable adhesion to the surface.
After pasting, the protective material is leveled with a hard and soft squeegee, while helping to remove excess liquid and air bubbles. At the end of this procedure, the edges of the film are further degreased.
Further care of the film will not cause drivers much trouble. Car owners will only have to wipe the protected surfaces of the interior paint elements from dust from time to time with a soft cloth moistened with a small amount of water.